|
|
| The WT3-201M motorized wire crimp pull tester is designed to measure pull-off forces of up to 200 lbF [1 kN] for wire and tube terminations. The tester conforms to numerous UL, ISO, ASTM, SAE, MIL, and other requirements for destructive testing. more ... |
| Test Equipment > Specialty Testers > Wire Crimp | ||||||
|
||||||
OverviewThe WT3-201M motorized wire crimp pull tester is designed to measure pull-off forces of up to 200 lbF [1 kN] for wire and tube terminations. The tester conforms to numerous UL, ISO, ASTM, SAE, MIL, and other requirements for destructive testing.
|
||||||
The WT3-201M motorized wire crimp pull tester is designed to measure pull-off forces of up to 200 lbF [1 kN] for wire and tube terminations. The tester conforms to numerous UL, ISO, ASTM, SAE, MIL, and other requirements for destructive testing. Non-destructive testing is also possible, such as pulling to a load or maintaining a load for a specified period of time, as per the requirements of UL 486A/B. Programmable pass/fail limits with red and green indicators and audio alerts help identify non-conforming samples.
The tester accommodates wire sizes up to AWG 3 (0.25 in [6.3 mm] OD), or custom sizes via the available machinable blank fixture. Auto-start automatically begins the test when the wire sample has been loaded. When the sample breaks, the tester can auto-reverse, output the peak force, store the peak force, and zero the display automatically, thereby increasing testing throughput. Further testing efficiency is achieved via the available Profiles function, through which multiple test setups may be saved and recalled as required. On-board data storage and statistical calculations is provided for up to 2,000 readings, with available date and time stamp for each saved data point. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. The WT3-201M includes MESUR™ Lite data acquisition software. MESUR™ Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.
Key Features
Controls & Indicators
| Model | WT3-201M |
|---|---|
| Force Capacity | 200 x 0.1 lbF | 3200 x 2 ozF | 100 x 0.05 kgF | 1,000 x 0.5 N | 1 x 0.0005 kN |
| Accuracy | ±0.2% of full scale |
| Wire dia. range | AWG30 - AWG 3 [0.01 - 0.25 in (0.3 - 6.3 mm)] |
| Sample length range | Minimum 6.5 in [165 mm], excluding termination |
| Max. elongation | 1.7 in [43 mm] |
| Speed range | Test speed: 0.4 - 12.0 in/min [10 - 300 mm/min] Approach/reverse speed: 13.0 - 96.0 in/min [325 - 2,400 mm/min] |
| Speed setting accuracy | ±0.2% |
| Speed setting accuracy | ±0% [Stepper motor driven] |
| Power | Universal input 80-240 VAC, 50/60 Hz |
| Sampling Rate | 7,000 Hz |
| Outputs | USB / RS-232: Configurable up to 115,200 baud. Mitutoyo: Serial BCD suitable for all Mitutoyo SPC-compatible devices. Analog: ±1 VDC at capacity, ±0.25% of full scale. General purpose: Three open drain outputs, one input. Set points: Three open drain lines. |
| Safe overload | 150% of full scale (display shows "OVER" at 110% and above) |
| Weight | 26.5 lb [12.0 kg] |
| Included items | Power cord, quick-start guide, USB cable, resource CD (USB driver, MESURTM Lite software, MESURTMgauge DEMO software, and user’s guide), and NIST-traceable certificate of calibration. |
| Environmental requirements | 40 - 100°F, max. 96% humidity, non-condensating |
| Warranty | 3 years (see individual statement for further details) |
| Feature | Part No. | Description |
|---|---|---|
| Profiles | WF010 | Save and recall sets of test parameters, such as speed, pass/fail limits, unit of measurement, etc. Maximum of 500 profiles may be stored |
| Pull to load | WF011 | The tester will stop when the specified load has been reached. |
| Load holding | WF012 | The tester will stop and maintain a specified load for a specified period of time |
| Date and time stamp | WF013 | A date and time stamp is applied to each saved data point |
| Complete options package | WFCOMP | Includes all Controller Features listed above |
AC1049 Calibration fixture Complete set of brackets and hardware for calibration of Mark-10 motorized and manual wire crimp pull testers. Weights and hanger not available from Mark-10
WT3004 Carrying case Provides storage space for the WT3-201M tester, optional ring terminal fixture, power cord, USB cable, and accessories
WT3002 Ring terminal fixture Secures ring terminations. Pin diameters from 1/8 to 3/8 in [3.2 to 9.5 mm].
WT3003 Machinable blank terminal fixture For unique sample shapes and sizes
|
||||||||||||||||||||||||||||||||||||
