Call Toll Free:
(800) 832-0055
View shopping cart
Analytical / Lab scales Baby Scales Bathroom Scales Body Fat Scales Counting Scales Crane Scales Fish & Game Scales Floor Scales Food, Deli & Grocery Scales
Itin Scale Company - your scale SuperStore
Height Measurement Industrial scales Jewelry Scales Kitchen Scales Legal for Trade Scales Medical scales Retail use scales Shipping Scales Specialty medical scales
Itin Scale Company
Chatillon Ametek DFIS-Series Force Gauges
DFIS-Series Chatillon Force Gauge

Chatillon Ametek DFIS Digital Force Gauges

Other Chatillon Ametek Force Gauges
Other Force Testing Equipment

Note that the DFIS-series force gauges are replaced by (yet is still completely compatible with) Chatillon's new E-DFE series force gauges

Accuracy: ±0.15% of full scale ±1 LSC (least significant count)
Tare Capacity: 10% of full scale in pound mode
Full Scale Deflection: 0.010"
Temperature: 40° to 110°F (5°C to 45°C), Stability: 0.03% per °F
Weight: Instrument: 2 lbs (6 lb shipping weight)

Integral Load Cell Gauge in six capacities from 2 to 500 lbs. - The DFIS offers the same accuracy and digital data communications capabilities as the full-featured DFGS series in an economical and user-friendly digital force gauge product.  The four basic keypad functions provide for minimal operator training in production floor or laboratory environments.  The internal digital sampling rate of 1000 samples per second provides a high level of accuracy in all but the most demanding force peak applications.

Operation Features:

  • Internal digital sampling rate of 1000 samples per second
  • Peak function automatically captures and stores highest instantaneous reading within each test.  The peak function may be engaged prior to testing to freeze the display at the highest reading.  It may also be engaged after the test to display the peak value stored.  The "zero" key clears peak memory.
  • Tension/compression modes are indicated by "T" for tension or "C" for compression upon force application. In the digital output, tension values are identified with a minus sign
  • Selectable units of measurement: lb, kg or N
  • Push button calibration
  • Rechargeable battery or AC operation allows 8 hour continuous battery operation with 12-14 hour charge. Low battery indicator on display. Continuous AC operation via charger/AC adaptor
  • Available for 110 VAC or 220 VAC

Output/Interface Features:

DFIS Force Gauge Shown on LTS Test Stand

Shown on LTS
test stand

  • Bi-directional RS232 interface for data transmission as well as peripheral control of all gauge keypad functions.  Digital data transmission up to 75 data points per second may be accomplished via the interface. Data transmission parameters are user-selectable.  (Baud rates from 300 to 19,200).  The DFIS may also be interfaced with a Chatillon digital test stand so that both gauge and stand may be peripherally controlled.
  • Mitutoyo output (modified BCD) for use with Mitutoyo brand processors
  • Analog Output: 0 to ±2.3 Vdc full scale (approximate)

Physical Design Features:

  • Die cast metal reversible housing. Split housing design permits upright display whether gauge is hand held or test stand mounted.
  • Easy to read 1/2" high LCD display with 4-1/2 digits for forced value. Smaller characters within the display indicate units of measurement, test mode and low battery
  • 4 key membrane keypad with separate on/off switch
  • 2 separate rear mounting hole patterns: (2) #10-32 thread holes for light duty stands, or (4) 1/4-20 thread holes for heavy duty stands.
  • Removable load cell shaft: 2 lb through 100 lb: #10-32 thread, 200 lb & 500 lb: 5/16-18 thread
  • Side holes for optional threaded handles
  • Output connector: 12 pin "Hirose" design

Standard Accessories:

DFIS in padded carrying caseStainless steel attachments include a flat head, hook, cone, chisel and extension rod. Gauge, battery charger, attachments, Allen wrench and operation manual are furnished in a cushioned carrying case.

Chatillon Ametek DFIS Digital Force Gauges - Specs

*maximum load with no mechanical damage (display blanks at 110% rated capacity )


Capacity x Graduation

Safe Overload*


2 lb  0.002 lb

5 lb

1 kg x 0.001 kg

10 N x 0.01 N


10 lb x 0.01 lb

20 lb

5 kg x 0.005 kg

50 N x 0.05 N


50 lb x 0.05 lb

75 lb

25 kg x 0.02 kg

250 N x 0.02 N


100 lb x 0.1 lb

150 lb

50 kg x 0.05 kg

500 N x 0.5 N


200 lb x 0.2 lb

300 lb

100 kg x 0.1 kg

1000 N x 1 N


500 lb x 0.5 lb

750 lb

250 kg x 0.2 kg

2500 N x 2 N


2 each, Aluminum Pull Handles


Mounting Kit for LTS, LTC and LTCM4 Test Stands


Mounting Kit for HTC and UTSM Test Stands

Please click here for recommended Test Stand configurations

Click here for Brochure
(Adobe PDF)

Get Adobe Acrobat Reader FREE






Copyright ©1998-2017 Itin Scale Co., Inc. All rights reserved with comments or questions about this site

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams



Your account Search Contact Us Store Directory Home page Your account Contact Us Search our site Site map and product categories