Call Toll Free:
(800) 832-0055
View shopping cart
Analytical / Lab scales Baby Scales Bathroom Scales Body Fat Scales Counting Scales Crane Scales Fish & Game Scales Floor Scales Food, Deli & Grocery Scales
Itin Scale Company - your scale SuperStore
Height Measurement Industrial scales Jewelry Scales Kitchen Scales Legal for Trade Scales Medical scales Retail use scales Shipping Scales Specialty medical scales
Itin Scale Company
AND Weighing AD-5200 & AD-5300 Weighing Indicators
AND AD-5200 / AD-5300 Digital Scale Indicators

AND Weighing AD-5200 & AD-5300 Weighing Indicators
currently in stock
Shipping Weight: 10 lbs. (estimate shipping cost)
Other AND scales
Other Industrial scales



Options: AD-5200-20 Counting EPROM, Add $185
AD-5200-755 Analog Output Board, Add $189
AD-5200-RB Unpopulated Relay Board, Add $265
AD-5200-OR Output Relays for AD-5200/AD-5300, Add $35
AD-5200-IR Input Relays for AD-5200/AD-5300, Add $35

AND AD-5200 and AD-5300 d igital scale indicators with up to 200,000 display resolution, programmable print formats, 2 ASCII outputs, 500 Weigh In / Weigh Out memory and Time and Date standard.

  • Up to 200,000 Display  Resolution
  • 500 Weigh In / Out Memory (32K RAM)
  • Built-In & Programmable Macros
  • 500 Set Point & Accumulators
  • AD-5200 Painted Steel Models
  • AD-5300 Stainless Steel Models
  • Programable Print Formats
  • Table/Wall Mount Brackets
  • Up to 60 Updates per Second
  • Two (2) ASCII Outputs
  • Two (2) Year Warranty


  • Gross, tare and net weighing
  • Vehicle and railroad weighing
  • Multi-container or axle weighing
  • Parts counting and weighing
  • Weigh system interface to Distributed Control System
  • Batching and process control systems
  • Drum filling, tank, hopper, bench and floor scales
  • Over/Under check weighing and materials testing
  • Chemical and washdown environments

Standard Features

  • Display: Bright red LED: 1 inch x 6 digit numeric
  • Status Indicators: Gross, net, motion, zero, lb, kg (LED)
  • Keyboard: 19 key sealed tactile feel membrane
  • Internal Resolution: 20 bit A/D/ Sigma-Delta; 1,048,000 d
  • Display Resolution: 200,000 dd industrial; 10,000 dd HB44
  • Display Increments: Selectable 1, 2, 5, 10, 20, 50, 100
  • Decimal Point: Selectable 0, 1, 2, 3, 4 decimal places
  • Conversion Rate: 60 samples/second typical
  • Signal Sensitivity: 0.1 uV/graduation (min)
  • Signal Range: 0.5 mV/V to 6 mV/V
  • Load Cell Excitation: 10 ±0.5VDC (-5 to +5)
  • Load Cell Power: 12 x 350 W or 24 x 700 W load cells
  • Auto Zero Tracking: 0-60 dd in 1/4 dd increments
  • Auto Zero Delay: 0-25 seconds in 0.1 second increments
  • Motion Detect: 0-60 dd in 1/4 dd increments
  • Motion Delay: 0-25 seconds in 0.1 second increments
  • Digital Filter: 0-18 selectable filter (DSP) levels
  • Calibration: Selectable multi-point (up to 5) digital calibration to linearize input signal
  • Watchdog Timer: Enable / disable fault tolerant operation
  • RFI Protection: Signal, excitation and sense lines
  • RAM: 32K provides 500 ID storage (parts, etc.)



  • Serial Port 1: Simplex RS232 or 20mA current loop
  • Serial Port 2: Duplex RS232, 20mA or RS485
  • Digital Port: 3 inputs and 3 outputs; low active (TTL)
  • Print Formats: 4 user configurable print formats

General Specifications:

  • Power: 110/220VAC ±10% at 50/60 Hz or 12-28 VDC
  • Power Consumption: 10W at 115VAC, 6W at 12VDC
  • Operating Temperature: -10 to +40 °C
  • Enclosure: NEMA 4 / IP66 stainless steel washdown
  • Net Weight: 6 lbs
  • Warranty: 2 year limited


Modes of Operation:

  • Mode 0 - Normal: Basic, gross, tare and net weighing

  • Mode 1 - FIll to Setpoint: Single setpoint fill with relay output control and weight print

  • Mode 2 - Over / Under Checkweigh: Provides 3TTL outputs and 2 setpoints to indicate over, under and between weight conditions. Outputs can activate lights or alarms.

  • Mode 3 - Vehicle Weigh In / Out with Totals: Weigh-in / Out program for up to 500 vehicles; Maintains running totals for each vehicle; Provides reporting functions

  • Mode 4 - Multi-Container / Axle Auto Weighing: Auto weighs and prints each weight placed on the scale; Each weight is sequentially numbered and accumulated; The total can be printed manually or automatically; Provides traffic light control.

  • Mode 5 - Auto Axle Weigh (Long Scales): Same as Mode 4 but previous axles are auto tared

  • Mode 6 - ID Tare, Print and Total: Provides tare entry and recall by ID; Prints ID, sequence number and GTN weights; Keeps running totals by ID: Provides reporting functions

  • Mode 7 - Peak Hold Mode: Display or print gross or net weight


  • Parts Counting: Parts counting and weighing program
  • Analog Output Module: Fully isolated 0-10VDC or 4-20mA; 16 bit resolution; 650W load resistance
  • Relay Box: 4 channel external relay box
  • Relay Modules: Input / output solid state (AC/DC) relays
  • Clock Module: Time and date clock Y2K and leap year compliant
  • High Speed (HS): 100 samples per second conversion rate; High speed process control applications
  • EZ-LINK: PC software; Facilitates configuration and Scale Basic programming







Copyright ©1998-2017 Itin Scale Co., Inc. All rights reserved with comments or questions about this site

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams



Your account Search Contact Us Store Directory Home page Your account Contact Us Search our site Site map and product categories